Creality’s CR-6 SE 3D Printer comes with incredible features as standard:
- Modular hotend
- Increased stability
- Synchronised Dual Z-Axis
- Intelligent Self-Leveling
- Filament Detector
- 32-bit electronics
- Drivers 2209
The CR-6 SE was a project launched through the KickStarter platform that was fully supported by the community, surpassing the brand’s fundraising expectations.
Key features of the CR-6 SE
- Print volume 235 x 235 250 mm
- 4.3” touch screen
- Meanwell 350W / 24 V power supply
- Silent plate
- Nozzle temperature up to 260 ℃
- Hot bed up to 110 ℃
- Built-in filament sensor
- Print resume function
- Carborundum glass hot bed
- Stable structure
- Low noise
Self-leveling
Incorporates the latest Creality levelling technology. No need to calibrate the hot bed. The 3D printer self-calibrates through 16 points automatically to achieve the best finishes with the least effort and without any intervention, improving adhesion and reducing errors,
Assembly
Another feature that makes the CR-6 SE stand out is its easy assembly. The 3D printer is made up of 5 parts that are joined together by screws. It consists of:
- The base part with the electronics
- Z-axis with built-in fuser and extruder.
- Screen
- Handle for upper clamping
- Spool holder
Modular Hotend
The completely redesigned modular hotend makes it easy to replace individual components. You can modify the aspects of the hotend to suit your needs. In addition, it features improved heat dissipation that will increase the quality of your prints.
Synchronised Dual Z-Axis
One of the things that many Creality users have been asking for in low-end 3D printers is the addition of a dual Z-Axis to improve the stability and finish of their prints.
Well, the CR-6 SE is designed with a wider base and equipped with dual Z-axes combined with an adjustable timing belt that translates into flawless motion and improved refined results. Therefore, the machine’s stability and performance are simply impressive.
Carborundum Glass Base
As usual with Creality 3D printers, the Carborundum Glass base distributes the heat evenly, and also makes the heating process of the base faster. It also provides excellent adhesion, and the prints are easy to peel off.
Quiet
Thanks to its latest Trinamic controller, which helps to ensure that voltage control, fast movement and printing are quiet.
Dimensions
The Creality CR-6 SE looks sturdy, and in fact, it is quite a robust printer.
This incredible 3D printer has a great design that complements any desktop you use it on. In addition, the self-designed profiles and stepper motor cover prevent filament debris and dust.
Print volume: 235 x 235 250 mm
3D printer volume: 442 x 462 x 540 mm
Photoelectric Filament Sensor
The filament sensor will stop printing if the filament runs out or splits. It has a photosensitive cell that controls the spinning of the filament, so there will be no errors in detecting a breakage, or when the filament runs out.
New Touch Screen
Unlike other Creality printers, such as the Ender 3 V2, the CR-6 SE comes with a 4.3″ full touch screen as standard.
Other Additions to the CR-6 SE
- Belt tensioners
- Print resume function
- Foldable spool holder
- Built-in tool drawer
- Stepper motor cover
- Hot bed cable protection
- Extended Y-axis profiles
- Meanwell power supply
- Silent base plate
Materials
This 3D printer allows the printing of various materials:
- PLA filament
- PETG
- ABS
- Flexible Filament
- ASA Filament
- etc…
Technical Characteristics
- Extrusion type: Bowden system
- Nozzle: Mk8
- Printing Volume: 235 x 235 x 250 mm
- 3D Printer Volume: 442 x 462 x 540 mm
- Maximum nozzle temperature: 260 ºC
- Maximum bed temperature: 110 ºC
- Maximum print speed: 100 mm/s (depending on material)
- Accuracy (max. resolution): 0.1 mm
- Filament Sensor: Yes
- Print recovery: Yes
- Supports third party material (filament): Yes
- Filament Diameter: 1.75 mm
- Nozzle diameter: 0.4 mm
- Supported filaments: PLA, ABS, PETG, Flexibles…
- Supported file format: Gcode
- Leveling: Intelligent automatic.
- Environment: open
- Gross Weight: 9.5 Kg
Other Mechanical Characteristics
- Extruders: 1
- Laminating software: Cura, Repetier, Simplify 3D, Slic3er, etc…
- Voltage: AC: 110 V / 230 V (50-60 Hz)
- Power: max. power consumption 350W
- Connectivity: USB, micro SD
Reviews
There are no reviews yet.