Anycubic Photon MONO X

Anycubic Photon Mono X is a resin 3D printer, with LCD technology, low cost, which stands out for its large size and printing speed. This printer uses resin for 3D printing.

Description of Anycubic MONO X

The Mono X is a resin 3D printer with LCD technology.

It has an 8.9 inch Monochrome 4k LCD screen. Thus, the 3D printer achieves incredible speeds of 1-2 seconds per layer. The Anycubic Mono X’s new screen increases the lifespan compared to traditional LCD screens, allowing you to print even more hours before you notice even the slightest wear and tear.

The high print volume does not mean lower quality – quite the contrary! The Mono X offers a quality of up to 50 microns, the machine also has anti-aliasing, for incredibly detailed parts.

Printer Volume

Print Volume: A large build area for your 3D prints: 192 mm (L) * 120 mm (W) * 245 mm (H)
Printer Volume: 270mm (Length) * 290mm (Width) * 475mm (Height)

8.9” Monochrome 4k LCD Screen

Monochrome displays can last several thousand hours. Monochrome displays allow very short layer exposure times for faster print times.

Print Speed

The exposure time is a real low 1.5-2 seconds, and the maximum print speed is 60mm/h, which makes the print speed 3 times faster than other printers.

Safe Design

The printer will shut down immediately if the top cover is removed. This function is disabled by default.

Anycubic Laminator

New features are added to the software. Supports up to 8x anti-aliasing: fast cut, hollow, split pattern… Also compatible with other laminators like Chitubox.

High performance Z-axis

The Z-axis is supported by dual linear rails, stepper motor and slack nut combination that drastically improves stability in motion and reduces the risk of printing failures.

New Matrix light source

The new Matrix light source has been redesigned and consists of several UV LED lights that offer a more uniform exposure.

This improves accuracy, and also shortens exposure times, reducing printing times.

Cooling

It features an integrated cooling system for the UV exposure unit – increase print yields!

Features:

• Quality power supply
• Extra security. Automatic print interruption when top cover is opened
• Wi-Fi module
• 3.5 inch touch screen
• Details up to 50 microns
• Stable Z-axis
• Structured platform for better adhesion
• Metal resin tank marking with maximum capacity indication

Technical features

• System: ANYCUBIC Photon Mono X
• Operation: via a 3.5 inch touch screen
• Software : ANYCUBIC Photon workshop
• Connectivity: USB
• Technology: SLA based LCD
• Light source: high quality filament (wavelength 405 nm)
• XY resolution: 0.050mm 3840*2400(4K)
• Z-Axis Resolution: 0.01mm
• Layer Resolution: 0.01-0.15mm
• Printing speed: MAX 60mm/h
• Power: 120W
• 3D Printer Volume: 270mm (L) * 290mm (W) * 475mm (H)
• Build Volume: 192mm (L) * 120mm (W) * 245mm (H)
• Material: 405nm UV Resin
• Net Weight: ~10.75kg

Buy Anycubic Photon MONO X