95A Filaflex Black 1,75 mm (medium flex bowden compatible)

The Filaflex Medium-Flex filament allows making flexible and resistant parts, being also compatible with all the 3d printers of the market.

The new reformulation and Shore hardness 95A allows printing at a higher speed than any other flexible filament, and similar printing settings as PLA filaments. This material is very simple to use without making any modifications in your 3d printer.

FEATURES

• Diameter tolerance +/- 0.04mm
• Net weight: 500 gr
• Compatible with bowden type printers.
• High elasticity and excellent abrasion resistance
• No need for heatbed, blue-tape or buildtak surface.
• Print speed up to 20-120mm / s
• Printing temperature 215-235 C
• Odorless
• Resistant to common solvents (acetone, fuel etc.)
• Net Weight: 500gr

RECOMMENDATIONS FOR USE

To start with Filaflex 95A medium-flex, the configuration of your printer should be:

DIRECT DRIVE 3D PRINTERS SUCH AS (Witbox 1,2, hephestos 2, Makerbot series)

• Layer height: 0.08-0.3 (for nozzle 0.4mm) Optimal results with height 0.2mm
• Printing speed: 45-60mm / s
• Temperature: 215-225 Celsius
• Retraction speed: 35-120mm / s
• Retraction distance: 3.5-5mm
• Traveling speed: 160-200mm / s

BOWDEN TYPE 3D PRINTERS (Ultimaker; BCN3D Sigma, Delta etc)

• Print speed: 25-50mm / s
• Temperature: 220-235 Celsius
• Retraction speed: 10-45mm / s
• Distance Retraction: 3.5-8mm
• Traveling speed: 160-200mm / s