82A Filaflex Original Orange 1,75 mm

FILAFLEX ORIGINAL 82A

FEATURES

• 1,75 mm or 2,85mm available
• +-0.05mm tolerance
• Printing temperature (210-230 °C) depending your hotend and extruder.
• Print speed (20-110 mm/s)
• High adhesion with 3d printed bed
• Do not need heatbed
• Do not need kapton or blue tape.
• Do not need hairspray or special adhesion spray
• Odorless
• Resistant to acetone, fuel and solvent.

PRINTERS COMPATIBILITY

HOW TO START PRINTING WITH FILAFLEX?

• Print speed 20mm/S
• Print temperature (240 °C)
• None retractions or low distance (1mm retraction distance and 30mm/s speed)
• Increase the extruder flow if your plastic melt flow is not constant.(105-115%)
• Decrease the pressure of the idler bearing of your extruder in order to avoid filament clogging between the extruder gear and bearing.

Options:

• 250 gr (net weight)
• 500 gr (net weight)