Use this ABS acrylic 3D printer enclosure with your LulzBot TAZ 6 to minimize warping and cracking caused by printing in cold and drafty environments while keeping curious hands and paws away from the heated and moving parts of your 3D printer.
This new TAZ 6 3D printer enclosure features a strengthened design with ABS panels, LulzBot branded laser-etched acrylic, and comes ready to assemble with all components provided (no 3D printing required).
Perfect for:
- Cold and/or drafty environments
- Printing materials with high shrink rates, like ABS, Nylons (Polyamides), and Polycarbonates
- Classrooms, Libraries, and high-traffic areas with curious hands
This enclosure is made with optically clear, lightweight 3mm thick extruded acrylic and rugged ABS panels. Assembly and installation is easy as this kit contains all the necessary hardware, including the four 3D printed corner brackets.
Advanced users can mount a 40 mm fan to vent air from the enclosure, add filtration, and more. When assembled, this enclosure only adds 62 mm (2.44 in) along the length of the Y-axis (front to back).
Tools Needed
- 2.5 mm hex driver for M3 screws
- 3 mm hex driver for M4 screws
- 4 mm hex driver for M5 screws
- Optional: Painters tape
- Optional: Flat razor
- Optional: Zip ties
Time Required
2-3 hours, based on skill level
Physical Dimensions
- LulzBot TAZ 6 Operating Dimensions (Standard): 82 cm x 63 cm x 52 cm (32.28 in x 24.8 in x 20.47 in)
- LulzBot TAZ 6 Operating Dimensions (with Enclosure): 82 cm x 69.2 cm x 52 cm (32.28 in x 27.2 in x 20.47 in)
- Enclosure adds an additional 62Â mm (2.44 in) along the Y-axis (from front to back).
Reviews
There are no reviews yet.