3D Printing
EasyWood FormFutura Pine 2,85 mm
32.95€
EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free.
Out of stock
Email when stock available
Description
EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free.
EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature.
EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature.
Unique features
- Extremely high wood-filling of 40%
-
- Real wood feel, look and smell
- Very easy to print
-
- Warp-free printing and no deformation after cooling
- Great thermal stability and filament flowing behaviour
- Perfect first- and inter-layer adhesion
- Can be printed at high printing speeds
- Create wood-nerve structures
-
- By postprocessing the printed object with a piece of fine grit sandpaper
- By varying with the print/extrusion temperature
- Biodegradable
- Weight: 500 g
General printing guidelines *
| Nozzle size: ≥ 0.5mm | Layer height: ≥ 0.12mm | Flow rate: ± 104% |
| Print temp: ± 200 – 240° C | Print speed: High | Retraction: Yes ± 5mm |
| Heat bed: ± 0 – 60° C | Fan speed: 50-100% | Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Nozzle cleaning
When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.
Additional information
| Weight | 0.7 kg |
|---|---|
| Dimensions | 20 × 20 × 10 cm |
| Diameter | 2,85 mm |
| Filament colour | Brown |
| Filament difficulty | Easy |
| Filament features | architecture, biodegradable, light, machinable, Stiff |
| Filament size | M (0.5 – 0.75 kg) |
| Manufacturer - filaments | Formfutura |
| Filament material | Wood |
Reviews (0)
Be the first to review “EasyWood FormFutura Pine 2,85 mm”
Related products
Filaments
Filaments
17.96€
Out of stock
Filaments
17.96€
Out of stock
Filaments
Out of stock
Filaments
Filaments
Out of stock
Filaments
-10%
Filaments
Reviews
There are no reviews yet.