FILAFLEX ORIGINAL 82A
FEATURES
- 1,75 mm or 2,85mm available
- +-0.05mm tolerance
- Printing temperature (210-230 °C) depending your hotend and extruder.
- Print speed (20-110 mm/s)
- High adhesion with 3d printed bed
- Do not need heatbed
- Do not need kapton or blue tape.
- Do not need hairspray or special adhesion spray
- Odorless
- Resistant to acetone, fuel and solvent.
PRINTERS COMPATIBILITY
HOW TO START PRINTING WITH FILAFLEX?
- Print speed 20mm/S
- Print temperature (240 °C)
- None retractions or low distance (1mm retraction distance and 30mm/s speed)
- Increase the extruder flow if your plastic melt flow is not constant.(105-115%)
- Decrease the pressure of the idler bearing of your extruder in order to avoid filament clogging between the extruder gear and bearing.
Options:
- 250 gr (net weight)
- 500 gr (net weight)
Victor Manuel Castañares Martin (verified owner) –
Color is a bit salmon.
André Kraft (verified owner) –
Lässt sich gut drucken. Schnelle Lieferung, Danke.