90A PEBA Flexfill Fillamentum 1,75 mm

Flexfill PEBA 90A is based on polyether-block-amide (PEBA), which was specially developed for processing by 3D printing.

Although it is flexible with Shore hardness 90A, it has a different thermal, mechanical and chemical behaviour than other Flexfill filaments.

Characteristics

Excellent mechanical properties.
Flexible even at low temperatures
High reversible deformation
Rebound resistance preserved also at low temperatures (down to -60°C)
High chemical resistance, resistance to automotive fluids (gas, diesel, oil, …)
Resistant to cyclic loads without obvious damage
High energy return, low hysteresis
Resistance to tearing
Low density, light weight
Recyclable, BPA-free, low smoke emission.

Technical Specifications:

Diameter tolerance: +/- 0,10 mm
Printing temperature: 225 – 245 °C
Hot bed temperature: 70 – 90 °C
Weight: 500 g filament (+ 250 g spool)

Other FlexFill PEBA 90A Specifications

Polymer Base: Polyamide + ether
Tensile strength: 36 MPa
Elongation at break: > 1000 %
Density: 1.00 g/cm3
Moisture Sensitivity: High
Chemical resistance: Car fluids, toluene, acetone, ozone
Gas permeability: Medium
Optical properties: Glossy, very transparent

Applications

The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.