Smartfil Wood
The Smart Materials 3D Smartfil Wood filament is a first quality PLA with a high percentage of natural wood, it does not incorporate recycled or recovered material, so it presents an excellent resolution in printing. It is available in this color and 3 more as shown in the list below:
- Walnut
- Ebony
- Cedar
- Bamboo
What can you get out of this filament?
Smartfil Wood offers a wide range of design possibilities. We can generate from replicas of sculptures, models simulating wood, design pieces of environments, furniture and even restoration, wooden tools, etc …
Tips for a correct use of wood filament
Due to the high amount of wood particles can cause blockages in nozzles 0.4 mm in diameter so we recommend using nozzles with a diameter of 0.5 or higher to avoid this problem.
It is recommended to feed the printer without making pronounced turns on Bowden systems to avoid filament breakage.
It is recommended to print with a layer height higher than 0.2 mm.
It is important to prevent the material from heating up in the extruder while the printing is in standby because of the possibility of blockages caused by the crystallization of the material.
The surface appearance can be varied by increasing the printing temperature by taking on darker shades.
Technical data
- Printing temperature: 200 – 250 ºC
- Temperature resistance: 75 ºC
- Printing bed temperature: 0 – 60 ºC
- Density: 1,13 g/cm3
- Net weight: 750 gramos
The Smart Bag is a multi-layer bag with an EVOH barrier and high effectiveness zip seal. Trough its transparent base, you can appreciate the color of the filament without opening the bag.
Roger Marcos (verified owner) –
I see the results as normal brown abs, I don’t see them as wood.