60A FilaFlex PRO Black 2.85 mm

Filaflex 60A PRO is an ULTRA SOFT TPE flexible filament for 3D printing. It is the most elastic and flexible filament in the Filaflex filament range.

Material Quantity: 500 grams

Description of 60A FilaFlex

The 60A range is an “Ultra-Soft” TPE elastic filament. Its properties make this material similar to silicone.

After stretching, it returns to its original shape.

Like the entire filaflex range, the material has excellent adhesion, which in fact allows it to be printed without heating the printer base. The material does not emit any odour when printed.

It is more complex to print than other flexible filaments such as TPU.

The following table shows the different hardnesses of the materials according to the Shore scale. Most flexible materials measure their hardness on the Shore A scale.

Image source: Recreus

CHARACTERISTICS

Diameter: 2.85 mm
Diameter tolerance : 0.04mm
Printing temperature: 215-235 °C
Printing speed: 20-40 mm/s
Shrink speed: 35-50 mm/s
Retraction distance: 2.5-6 mm
Travelling speed: 160 – 200 mm/s
Recommended layer height: 0.08 – 0.3. Optimum results range from 0.2 to 0.25 (for 0.4 nozzles).
High adhesion to the printing table
No need for hot bed
No need for blue tape or kapton tape
No need for lacquer or any other spray adhesive.
No odour
Resistant to solvents, acetone or fuel.
Material Quantity: 500 grams

PRINTER COMPATIBILITY

Filaflex is a slightly more complicated filament to print with than rigid filaments, but with proper setup you will be able to print on any printer.