PLA 870 X Filament X Tough White 1.75mm

PLA 870 filament of the brand X To Print, very easy to print on any 3D printer on the market. The whole manufacturing process guarantees a good consistency in the diameter and colour of the filament.

The PLA 870 (Polylactic Acid) material is manufactured with NATUREWORKS INGEO 3D870, and provides an impact resistance 50% higher than an ABS, and reaching 120% when following a post-process of baking the material. Because of its ease of printing, it is still perfect for all kinds of situations. A material with a high quality of detail, low warping and good adhesion.

X Filament manufactures all its filaments in Europe.

 

Why print with X Filament?

• High quality finish
• Suitable for printing indoors
• No odour
• Ideal for high detail 3D printing and prototypes
• Precise winding
• No moisture bubbles due to vacuum sealing in the manufacturing process.
• UV resistance
• High impact resistance

 

Characteristics PLA 870 X Filament:

• Constant diameter across the spool: 1.75 mm
• Made in Europe
• Spool size: 1000 grams
• High adhesion
• Easy to print
• Vacuum packed
• Perfect winding without knots
• Glossy finish
• Biodegradable
• Higher strength than standard PLA

Lamination Parameters (3D printing) PLA X Filament:

• Nozzle temperature: 200ºC / 230ºC
• Heat Bed Temperature: 50ºC / 70ºC

Is my 3D printer compatible?

PLA 870 X Filament has been tested with the best-selling 3D printers on the market. It is compatible with all 3D printers with a diameter of 1.75 mm.

This is a sample list of 3D printers compatible with this filament:

• Ender 3
• Ender 3 PRO
• Ender 3 V2
• Ender 3 S1
• Ender 5, 5 PLUS
• Ender 6
• Creality CR-10, CR-10 V2, CR-10 S5, CR-10 MAX
• Creality CR-6 SE
• Artillery Genius and Genius PRO
• Artillery Sidewinder X1 and X2
• Artillery Hornet
• Prusa MK3S+
• Prusa Mini
• Raise E2
• Elegoo Neptune
• FlashForge
• Kingroon KP3S
• Sunlu S8 Plus
• Geeetech Prusa i3 PRO W
• Geeetech A10M
• Anet A8

 

X Filament Care and Maintenance Tips

1. Store your filament in a sealed bag or box after each print to avoid moisture.
2. Be sure to insert the free end of the filament into the holes to prevent tangling the next time you use it.
3. If you won’t be printing with it for a few days, retract the filament to protect the printer nozzle.

Tips for printing PLA 870 X Filament at maximum quality

Improved adhesion to the heat bed

1. Check that the surface is clean with no traces of previous prints.
2. Check the level of the bed and adjust the Z-height of the nozzle if necessary.
3. Raise the layer height for the first layer.
4. The temperature of the heat bed can be activated at around 50°C 70°C.
5. Apply glue or special 3D printing lacquer to your printing surface.

Avoid Threads or Stringing in the parts

1. Activates shrinkage. This is the most common method to solve this problem on 3D printers.
2. Adjust the retraction distance based on the optimal parameters of your 3D printer.
3. Adjust the retraction speed based on the optimal parameters of your 3D printer.

 

You can always ask us for specific printing parameters for your 3D printer.

Buy PLA 870 X Filament for 3D printers

Weight	1 kg
Dimensions	20 × 20 × 10 cm
Brand	X To Print
Filament difficulty	Easy
Filament material	PLA
Filament size	L (1 kg)
Filament colour	White
Filament features	biodegradable
Diameter	1,75 mm