Resin XYZPrinting Standard Grey for Nobel 1.0

• Heating of this product is strictly prohibited. Photopolymer resins may generate vapors that may cause discomfort when subject to high temperatures.
• Please keep the product in a well-ventilated space out of children’s reach.
• Avoid skin or eye contact with the uncured resin. If accidental contact occurs, please immediately rinse the affected area thoroughly using clean water.
• Uncured resin in the tank may be solidify if exposed to sunlight before disposal. Therefore, be mindful when discarding uncured resin and do not pour material directly into the sink.

Usage Reminder

• Remove the printed object from the print bed, and wash away the uncured resin on the surface of the object with alcohol as soon as printing is finished.
• After the alcohol on the surface has evaporated, you may post-cure the object with a UV cure chamber to increase the strength of the object effectively.
• Uncured resin in the resin tank can be saved for the next print. To prevent the resins from degrading due to the exposure to other light source or air, it is recommended to filter the resin and store it in an opaque container. Before the next print, shake the resin well and pour it back to the resin tank.