Resin FormFutura Platinum LCD Series Solid White 500 ml

The Formfutura Platinum LCD Resin Series is a range of general purpose photopolymer LCD resin, which is specifically engineered to work with all open source LCD and DLP 3D printers in the range of 385 – 420nm.

This Platinum LCD resin is almost odourless and allows you to 3D print objects with extremely high accuracy and relatively short curing times.

Unique features

• Almost no odour  – Compared to other resins on the market Platinum LCD resin is relatively odour-free!
• UV & weather resistant
• Fast printing with short curing times
• High accuracy
• Vivid colours with an extremely high level of colour fastness
  • Truly opaque and translucent colours available
  • No discolouration and/or yellowing
• Low shrinkage
• Compatible with all open source LCD and DLP in the range of 385 – 420nm

Resin properties (uncured liquid)

• Viscosity: 500 cps at 25°C
• Density: 1.18 g/cm2

Mechanical properties

Test method on post cured objects through 30 minutes high power LED curing

Properties	Typical Value	Test Method
Glass transition temperature (Tg)	51° C	ASTM D7028
Water absorption	0.4%	ASTM D570-98
Impact strength (IZOD notched)	18 J/m	ASTM D256A
Tensile strength	45 MPa	ASTM D638M
Tensile Modulus	1.0 GPa	ASTM D638M
Elongation at break	8%	ASTM D638M
Flexural Strength	66 MPa	ASTM D790M
Flexural Modulus	1.8 GPa	ASTM D2240
Shore D Hardness	82	ASTM D2240

Preparation(s) before starting to print

1. Shake the bottle for at least 2 minutes before each use.
2. After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin

The resin can be poured back from the vat into the bottle once your print is finished

3. Always use protective measurements like safety glasses and nitrile gloves when handling resins.

General printing guidelines

Base Curing Times at 50 micron

• Translucent Black: 12sec

• Translucent Aquamarine: 10sec

• Translucent Blue: 12sec

• Translucent Red: 11sec

• Solid White: 12sec

• Solid Black: 14sec

• Solid Light Grey: 13sec

Post processing

We do advise to post process your 3D print in order to achieve the material properties.

1. Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes

• An ultrasonic cleaner is preferred/recommended.

2. Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing.

• Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes

3. Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C

• The preferred curing wavelength is between 300-410nm.

Safety

Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

1. Always wear Respiratory Protection when sanding/cutting the resin object.
2. Always use nitrile gloves when handling resins and uncured resin object.

Weight	0.7 kg
Dimensions	25 × 10 × 10 cm
RESIN - COLOUR	White
RESIN FEATURES	Standard
RESIN - MANUFACTURER	Formfutura