3D Printing
DIMAFIX 3D Printing Adhesive
12.58€
DimaFix is now available so that your object remains fixed during the printing process and avoid deformation. DimaFix is an aerosol spray adhesive for 3D printers with a heated print bed that prevents warping of large objects.
Description
Good adhesion of your printed parts on the print bed is a must in 3D printing! DimaFix is now available so that your object remains fixed during the printing process and avoid deformation. DimaFix is an aerosol spray adhesive for 3D printers with a heated print bed that prevents warping of large objects.
Dimafix provides a strong bond between the first layer and the build surface when the bed is heated above 60 ° C. Below 60 ° C DimaFix is ineffective, so prints can be easily removed from the building board. The adhesive spray is completely water-soluble, so cleaning the construction panel is a simple process.
Features
- Avoid warping
- Suitable for all types of materials (especially ABS filaments)
- Strong bond during printing
- Once printed, the piece will detach automatically
- Recommended for printing on heated beds
- Easy to clean, the product is water soluble
- Each spray can allows more than 100 uses
How to use DimaFix
- Clean the build plate of your 3D printer
- Check if the print bed temperature is below 50 ° C
- Spray DimaFix on your print bed (use a well-ventilated room)
- Warm up your print bed and start printing
- After printing, wait for the print bed to cool
- Remove the printed item from the print bed
Properties
Additional information
| Weight | 0.6 kg |
|---|---|
| Dimensions | 10 × 10 × 15 cm |
| Brand | Dimafix |
| Spare Parts Type | Adhesive |
Reviews (10)
10 reviews for DIMAFIX 3D Printing Adhesive
Add a review
Related products
Accesories
20.75€ – 24.89€
Accesories
Out of stock
Accesories
Accesories
5.52€
Accesories
Accesories
1.98€
Accesories
Accesories
65.50€ – 79.50€
Alejandro M. (verified owner) –
Cumple su función
Alfonso Carmona (verified owner) –
Todo ok
Ruben Valls Amiguet (verified owner) –
Ya compre varias veces y cumple los requisitos indicados, pega muy bien la pieza y cuando se enfria la cama se suelta casi sola.
Jaume V. (verified owner) –
Incredible! It has never been easier to work with PVC, it adheres when it is hot and detaches when cooled.
Andrea (verified owner) –
It works great on any material and its odor is not very strong. If you use it in a well ventilated place, in 10 minutes there is no smell. Good buy, no doubt.
Joan (verified owner) –
Va mejor la laca del Clarel 🙁 No lo recomendaria
Alfonso (verified owner) –
Very useful to avoid warping. Easily cleaned.
Aguistin Gimenez Bernad (verified owner) –
Maravilloso!!! Ni una sola impresión fallida por culpa de no adherirse a la base, ademas el acabado de la pieza queda perfectamente liso y pulido. Un 10 de 10.
Abelardo M. (verified owner) –
Doesn’t smell and does his part well
jorge (verified owner) –
This product has become essential. I alreday knew and it´s worth its cost.