3D Printing
Description
The Filaflex Medium-Flex filament allows making flexible and resistant parts, being also compatible with all the 3d printers of the market.
The new reformulation and Shore hardness 95A allows printing at a higher speed than any other flexible filament, and similar printing settings as PLA filaments. This material is very simple to use without making any modifications in your 3d printer.
FEATURES
- Diameter tolerance +/- 0.04mm
- Net weight: 500 gr
- Compatible with bowden type printers.
- High elasticity and excellent abrasion resistance
- No need for heatbed, blue-tape or buildtak surface.
- Print speed up to 20-120mm / s
- Printing temperature 215-235 C
- Odorless
- Resistant to common solvents (acetone, fuel etc.)
- Net Weight: 500gr
RECOMMENDATIONS FOR USE
To start with Filaflex 95A medium-flex, the configuration of your printer should be:
DIRECT DRIVE 3D PRINTERS SUCH AS (Witbox 1,2, hephestos 2, Makerbot series)
- Layer height: 0.08-0.3 (for nozzle 0.4mm) Optimal results with height 0.2mm
- Printing speed: 45-60mm / s
- Temperature: 215-225 Celsius
- Retraction speed: 35-120mm / s
- Retraction distance: 3.5-5mm
- Traveling speed: 160-200mm / s
BOWDEN TYPE 3D PRINTERS (Ultimaker; BCN3D Sigma, Delta etc)
- Print speed: 25-50mm / s
- Temperature: 220-235 Celsius
- Retraction speed: 10-45mm / s
- Distance Retraction: 3.5-8mm
- Traveling speed: 160-200mm / s
Additional information
| Weight | 0.6 kg |
|---|---|
| Dimensions | 20 × 20 × 10 cm |
Reviews (0)
Be the first to review “95A Filaflex White 1,75 mm (medium flex bowden compatible)”
Related products
Filaments
Out of stock
Filaments
34.45€
Filaments
32.95€
Filaments
20.45€ – 33.70€
-10%
Filaments
34.45€
Filaments
17.96€
Filaments
Reviews
There are no reviews yet.