Samples Pack Filaflex 95A 1,75 mm (medium flex bowden compatible)

FILAFLEX 95A MED-FLEX

The Filaflex Medium-Flex filament allows making flexible and resistant parts, being also compatible with all the 3d printers of the market. The new reformulation and Shore hardness 95A allows printing at a higher speed than any other flexible filament, and similar printing settings as PLA filaments. This material is very simple to use without making any modifications in your 3d printer.

FEATURES

• Diameter tolerance +/- 0.04mm
• Compatible with bowden type printers.
• High elasticity and excellent abrasion resistance
• No need for heatbed, blue-tape or buildtak surface.(for huge parts we recommend 3D lac or hairpray)
• Print speed up to 20-120mm / s
• Printing temperature 215-235 C
• Odorless
• Resistant to common solvents (acetone, fuel etc.)

RECOMMENDATIONS FOR USE

To start with Filaflex 95A medium-flex, the configuration of your printer should be:

DIRECT DRIVE 3D PRINTERS  SUCH AS (Witbox 1,2, hephestos 2, Makerbot series)

• Layer height: 0.08-0.3 (for nozzle 0.4mm) Optimal results with height 0.2mm
• Printing speed: 45-60mm / s
• Temperature: 215-225 Celsius
• Retraction speed: 35-120mm / s
• Retraction distance: 3.5-5mm
• Traveling speed: 160-200mm / s

BOWDEN TYPE 3D PRINTERS (Ultimaker; BCN3D Sigma, Delta etc)

• Print speed: 25-50mm / s
• Temperature: 220-235 Celsius
• Retraction speed: 10-45mm / s
• Distance Retraction: 3.5-8mm
• Traveling speed: 160-200mm / s

LIST OF 3D PRINTERS YOU CAN USE FILAFLEX 95A MED-FLEX

• Ultimaker Original, 2, 2+, go, 3, 3+
• BCN Sigma
• Up Box, Plus, Plus2
• Luzbolt
• Makerbot
• Type A series
• Prusa Original, Hephestos 1, 2
• CR-10
• Wanhao printer
• TUMAKER
• Witbox 1, 2
• Monoprice
• Makergear M2
• FlashForge Creator Pro

PACK INCLUDES:

• 50GR  SAMPLE GREEN 1.75mm
• 50GR  SAMPLE BLUE 1.75mm
• 50GR  SAMPLE FLUOR 1.75mm
• 50GR  SAMPLE RED 1.75mm