Premium quality, professional results

• It solidifies quickly: During the printing process, each layer must have cooled sufficiently before the print head deposits another layer of melted filament on top. Given our PLA solidifies quickly it provides better print quality for small-volume pieces without sacrificing speed.

• Minimum deformation due to thermal stress: Thermal stress is produced by temperature inequalities in various points of an object. In 3D printing, this results in the bulging of the first layers due to the thermal difference between the bed (room temperature) and the filament (about 190-220ºC). The thermal-stress deformation of our PLA is minimal, which helps reduce warping.

• Excellent adherence even without a heated bed: Using only the typical adhesion methods like lacquer, tape or fixpads, BQ PLA offers excellent adherence even without a heated bed.

• Biodegradable, ideal for domestic use: BQ makes their own PLA in Huesca (Aragon – Spain). Their spools hold 100% PLA of maximum quality. This completely biodegradable material is produced without the use of petroleum derivatives. PLA is generated by the polymerisation of lactic acid originating from the fermentation of vegetable-derived sugars. Unlike other materials, it does not give off unpleasant odours making it ideal for domestic use.

• The printing temperature range is between 200 and 220ºC: BQ PLA melts in the hot-end starting from 175ºC, however, due to possible variations in the temperature measurement and regulation of your printer’s hot-end, we recommend printing at above 200ºC*.

• The ideal print temperature is 205ºC: Through subjecting our PLA to exhaustive tests we have ascertained that the best print quality/speed ratio is achieved at 205ºC.

Specifications

• Dimensions: 140 x 45 mm
• Filament diameter: 1,75 mm
• Weight (Kg): 300 g
• Thickness: 1,24 g/cm3
• Spool axle diameter: 44 mm
• MATERIALS: 100% PLA
• PRINTING FEATURES
• Recommended printing temperature:: 200/220 ºC
• Heat distortion temperature:: 56 ºC (ISO 75/2B)
• Melting temperature:: 145/160 ºC (ASTM D3418)
• Glass Transition Temperature:: 56/64 ºC (ASTM D3418)
• IMPORTANT: *The optimal printing temperature will vary depending on the 3D printer being used and the chosen printing speed.
• COMPATIBILITY: Any printer that uses 1.75 mm filament

Comprar Filamento PLA 1,75 mm Azul 300 gr