Creality CR-3040 Pro

Creality CR-3040 Pro, new upgrade and high precision FDM 3D printer.

The Creality CR-3040 Pro 3D printer is the new upgrade of CR-3040. The print size is 300 x 300 x 400mm, with a new hotend for high print quality.

Highlights of the CR-3040 Pro

• Industrial size
• With a print volume of 300 x 300 x 400 mm
• More stable: Dual XY axis and dual Z axis
• 4.3 inch touch screen
• Air purification system
• Intelligent levelling with BL-touch
• Filament sensor
• Removable carborundum base
• Internal LED light

Ready to print

The CR-3040 Pro is ready to start printing. Just plug in the power cable, turn on the machine, and start meshing with the help of the BLTouch. You can adjust the Z-distance from the screen if any point is too close or too far away from the nozzle. You can also use the calibration wheels on the 3D printer bed. Once the meshing is done correctly, don’t worry about levelling!

High precision mechanical structure

With professional and delicate aesthetics, the fully enclosed structure and high loading capacity ensure a constant temperature environment for printing with high stability and precision.

With the double-door design, you can observe the printing process in all directions.

Ready to print technical materials? CR-3040 Pro features a closed and thermostable environment, allowing the printing of the most technical and demanding materials such as ABS filament, Nylon filament or PolyPropylene filament, as well as other filaments that require a stable environment for proper printing.

CR-3040 Pro dimensions

The machine has a printing volume of 300 x 300 x 400 mm.

CR-3040 Pro 3D printer occupies a total volume of: 540 x 471 x 885 mm

Carborundum Glass and Leveling Base

This base improves thermal conductivity as well as heat resistance. Thanks to the incorporation of this material, the base heats up faster and more evenly. In addition, it achieves excellent adhesion, so you don’t have to worry about the first layer.

The base is removable, so once you have finished your prints, you can remove it, let it cool, and proceed to remove your prints.

The base levelling of the CR-3040 Pro is assisted with BLtouch, which means that you will have to do a first assisted meshing. You can use the wheels on the 3D printer base, or the 3D printer screen to set the optimal distance between the nozzle and the bed. Once the meshing is done, you don’t have to level again! Every time you print, the CR-3040 Pro will remember your settings and print at the highest quality.

Double spindle in XY-axis and double spindle in Z-axis

The double transverse axis with precise screw and positioning transmission guarantees printing speed and printing stability.

New Hotend

Equipped with the new generation of heat sinks, the nozzle can be cooled in a timely manner without clogging.

The heating device with high power can heat up quickly. The improved platinum resistance thermistor has a more sensitive thermal transmission and a longer service life.

Air purification system

Equipped with double 6.25 fans, it effectively reduces air dust and avoids excessive temperature of the printing chamber.

LED light / real-time printing observation

Built-in LED light with soft light is convenient to observe the printing process and avoid printing failure.

Bowden Extruder with Filament Sensor

The Bowden extruder guides the filament through a teflon tube to the hotend, where the material is cooled and deposited on the hot bed. Prints are left with excellent quality and a professional finish.

Another feature of the CR-3040 Pro is its filament sensor, this sensor will warn you if the material suffers a breakage, or if the 3D printer runs out of material, pausing the print, until the machine is loaded with more filament.

This improvement avoids the loss of prints due to running out of material.

Touch Screen

4.3” touch screen that features a completely redesigned interface. This new interface is easy to use and very intuitive. It allows you to view functions, change parameters and choose levelling points, preheat, and much more.

Materials

Its structure and its closed environment allow the printing of all types of materials with excellent finishes.

• ABS
• Nylon
• Carbon Fiber Filament
• ASA Filament
• Polypropylene Filament

And of course, you can still use materials such as PLA or PETG filament or flexible TPU filament.

Technical Characteristics

• Extrusion type: Bowden system
• Extruder: Mk8
• Print Volume: 300 x 300 x 400 mm
• Total volume of the 3D printer: 540 x 471 x 885 mm
• Maximum nozzle temperature: 280 ºC
• Maximum bed temperature: 110 ºC
• Maximum print speed: 180 mm/s depending on material
• Printing accuracy (layer thickness) : 0.1mm
• Filament Sensor: Yes
• Print recovery: Yes
• Supports third party material (filament): Yes
• Filament diameter: 1.75 mm
• Nozzle diameter: 0.4 mm
• Supported filaments: PLA, ABS, PETG, Flexibles…
• Supported file formats: Gcode
• Leveling: Assisted with BLTouch.
• Environment: Closed
• Gross Weight: 110 Kg
• Net Weight: 58 Kg
• Wheels: Yes
• HEPA Filter: Yes
• Shipping Box Volume: 700 x 640 x 1115 mm

Other Mechanical Features

• Extruders: 1
• Laminating software: Cura, Repetier, Simplify 3D, Slic3er, etc…
• Voltage: AC: 110 V / 240 V (50-60 Hz) DC: 24V
• Power: max. power consumption 500 W
• Connectivity: USB, micro SD