3D Printing
ABS EasyFil FormFutura Glow In The Dark Green 1.75 mm
34.45€
EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
Out of stock
Email when stock available
Description
EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament.
EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
Unique features
- Superb process stability and limited warping
- Significant higher impact resistance than average ABS
- Very strong and durable
- Light-weight
- Viscat softening temperature of ± 103° C
- Wide variety of vivid opaque colors
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
| Print temp: ± 220 – 270° C | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 90 – 110° C | Fan speed: 0-25% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Abrasiveness
Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature. In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 20 × 20 × 10 cm |
Reviews (0)
Be the first to review “ABS EasyFil FormFutura Glow In The Dark Green 1.75 mm”
Related products
Filaments
Out of stock
Filaments
Filaments
Out of stock
Filaments
Out of stock
Filaments
Out of stock
Filaments
Out of stock
Filaments
Out of stock
Filaments
Reviews
There are no reviews yet.